Average hourly earnings jump after a month of layoffs concentrated in lower-paid jobs. Workers who kept their jobs might have received no raise at all. The Employment Cost Index provides another way to look at labor-cost growth by controlling for shifts in the mix of jobs.
Did the measured average change because the mix of jobs changed? Start by checking private wage component, hours weighting and quarterly comparison in the source documents. The calculations below distinguish the published record from an illustrative customer transaction and show how to check the result in dollars.
See the composition effect in a miniature payroll
Suppose equal hours are paid at $18 and $36. The average is $27 per hour. If the hours at $18 fall by half while hours at $36 stay fixed, the new average is (9 + 36) / 1.5 = $30. Neither hourly rate changed. The apparent 11.11% increase came from composition. A fixed-weight comparison keeping both groups at their original weights gives zero wage growth in this small example.
The ECI has separate wages-and-salaries and total-compensation indexes. The latter includes employer benefit costs. A comparison with hourly earnings should identify which ECI component is being used and whether the universe is civilian or private industry. A wage index is measured in index points while average hourly earnings is dollars per hour. Convert both to growth rates before comparing.
Match a quarterly measure with monthly earnings
A quarterly ECI observation and three monthly hourly earnings values have different timing. A quarterly average or a quarter-end observation can be chosen for hourly earnings, but label the convention. Four-quarter growth is often a cleaner first comparison than comparing a one-month change with a three-month index change. Match seasonal adjustments as closely as the question allows.
A market can expect labor costs to accelerate before the release. For a dollar-market interpretation, record the prevailing forecast, actual index reading and observed relative interest rates. A US wage surprise may reinforce or conflict with another release on the same morning. A higher hourly wage average alone cannot establish a change in the Fed’s intended policy.
A change in the wage mix can look like wage inflation
A delivery firm loses several junior workers and keeps its higher-paid drivers. The average hourly pay in a surviving sample can rise even if every driver’s rate stays flat. In the opposite direction, rapid rehiring of junior workers can depress the average during a period of genuine within-job raises. A fixed-weight index tries to isolate cost changes from this movement in work composition. Different coverage, response samples and measurement conventions can also matter, so attributing every gap solely to mix would go too far.
For a quarterly comparison use private industry wages and salaries in ECIWAG and private average hourly earnings, preserving their distinct survey designs. A total compensation ECI includes benefit changes that hourly cash wages cannot capture. Percent growth from aligned quarters gives both measures a common scale. A market repricing can depend on whether the latest report exceeded expectations, the size of prior revisions and what foreign central banks are signaling. A positive wage gap by itself describes neither an executable price nor a policy decision.
Hold the job mix constant and change the pay rates
Take two equal groups whose hourly pay begins at $20 and $40. With equal hours the average is $30. Give both groups a 4% raise, leaving hours unchanged. The rates become $20.80 and $41.60, and the average becomes $31.20, also up 4%. Now double the hours of the lower-paid group while keeping those new pay rates fixed. The combined average falls to about $27.73. Both groups still received a raise. The average reversed because the mix of paid hours changed. This example shows the purpose of composition control.
A fixed-weight wage index holds its specified composition constant within the construction, but it is not literally the wage of a permanent panel of identical employees. BLS sampling, occupation and industry groups, weighting updates and index procedures matter. The private industry wage-and-salary ECI addresses a narrower question than the total compensation ECI, which also includes benefit costs. A reference to rising labor costs should state which measure is rising and in which worker universe.
To compare a quarterly index with monthly average hourly earnings, decide whether to use the arithmetic mean of the three monthly published averages or the last month of the quarter. The workbook uses the former. A payroll- and hours-weighted quarterly recomputation from underlying data might differ. Keep a note describing that choice so another reader does not interpret a difference from a data terminal as a revision or a numerical error. A quarter-on-quarter change should not be read as year-over-year growth.
For monetary-policy interpretation, wage growth is one input among productivity, margins, prices, labor supply and demand. A wage surprise may affect interest-rate expectations even if it does not immediately change a company’s prices. Capture any market expectation before publication and identify whether the surprise came from wages, benefits or a prior-quarter revision. A dollar chart can show what happened to the currency. It cannot attribute the move to labor costs without checking the wider announcement and the corresponding foreign-market repricing.
Historical workbook: ECI wage growth minus AHE growth in percentage points
The workbook follows two measures of us private pay growth from a US dollar perspective. Its question is specific: Did the measured average change because the mix of jobs changed? Keep three columns beside the dates. Column one is four-quarter change in private wage eci in percent. Column two is year-over-year change in quarterly average private ahe in percent. The calculated column shows eci wage growth minus ahe growth in percentage points. Using the same definitions in every row makes it possible to explain an outlier by returning to the inputs instead of changing the story after the price has moved.
Use ECIWAG for US private industry wages and salaries. Compare with the quarterly arithmetic mean of monthly private average hourly earnings. Calculate each four-quarter percentage change separately, then subtract AHE growth from ECI growth. Comparing growth aligns units while measurement and coverage differences persist.
There are 40 quarterly observations from 2015 Q1 through 2024 Q4. The historical FX observations come from DEXUSUK. For the independent dollar comparison below, one unit of GBP is always expressed in US dollars. Where the published quote gives foreign currency per dollar, the comparison takes its reciprocal. This keeps a rise in the comparison series synonymous with appreciation of the named foreign currency against USD. The calculation of the main worksheet stays in its original units.
| Period | Four-quarter change in private wage ECI in percent | Year-over-year change in quarterly average private AHE in percent | ECI wage growth minus AHE growth in percentage points |
|---|---|---|---|
| 2015 Q1 | 2.6801 | 2.0862 | 0.5939 |
| 2019 Q4 | 2.9652 | 3.1443 | -0.1792 |
| 2020 Q2 | 2.9240 | 6.5758 | -3.6518 |
| 2021 Q2 | 3.5511 | 2.2773 | 1.2738 |
| 2022 Q4 | 5.1368 | 5.0128 | 0.1240 |
| 2024 Q4 | 3.7105 | 4.1057 | -0.3953 |
Read one row from the source to the answer
Start with 2019 Q4, near the chronological middle of the sample. The two inputs were 2.9652 for four-quarter change in private wage eci in percent and 3.1443 for year-over-year change in quarterly average private ahe in percent. Applying the stated rule gives -0.1792 for the wage growth gap. A reader reconstructing the published number should carry more precision than the table displays. The market comparison used an FX mark on 2019-12-31, quoted at 1.3269 in the ordinary GBP/USD convention. It is not necessarily the observation time of the other inputs.
Four-quarter private wage ECI growth of 2.97% compares with 3.14% growth in the average of three monthly private hourly earnings observations. The signed ECI-minus-hourly-earnings gap is -0.18 percentage points. A positive gap means the ECI wage measure grew faster in this particular comparison. Interpreting it as the share of workers receiving raises would mix a growth-rate difference with a population fraction that neither series measures.
For an illustrative $28.40 hourly base, applying the ECI growth factor would produce $29.24, while applying the AHE factor gives $29.29. Those are comparable scaling examples rather than forecasts for an individual worker. Actual pay depends on job, hours and compensation arrangements. Comparing with a total-compensation index would introduce benefits into the numerator, while using a single month’s earnings would shift the comparison window. Identify both changes explicitly if you alter this workbook.
Which input explains the largest change?
Across adjacent quarters the largest absolute change in the wage growth gap occurred between 2020 Q1 and 2020 Q2. The calculated value went from 0.1228 to -3.6518, a signed difference of -3.7747. A headline describing the two end values is accurate but incomplete. To identify what generated the change, first update only the first column. Then update the second while holding the new first column fixed. This procedure accounts for the whole change without assuming which input moved first in real time.
The first input went from 3.3137 to 2.9240. With the second held at its starting value of 3.1908, that gives a hypothetical intermediate result of -0.2669. The first step therefore contributes -0.3897 to the measured change. Replacing the remaining old input with 6.5758 contributes another -3.3850. Add the two signed contributions to recover -3.7747 before display rounding. A negative contribution offsets a positive one even if both raw inputs rose.
Now reverse the order. Updating the second input first produces -3.2621. Its first-step contribution under this order is -3.3850, and the remaining contribution is -0.3897. Addition and subtraction formulas give the same attribution either way. Products and quotients can distribute a joint interaction differently. If the two allocations differ, report the order you used or average the two contributions for each input. Both reconciliations describe an identity. Neither establishes an economic cause. The spread can change when either index accelerates or slows. The different designs invite investigation of composition and coverage, without identifying composition as the whole explanation.
| Measured change | Allocated to first input | Allocated to second input |
|---|---|---|
| -3.7747 | -0.3897 | -3.3850 |
Use a typical period to test a dramatic headline
Ordering the calculated record by level gives a minimum of 2020 Q2 (-3.6518) and a maximum of 2021 Q2 (1.2738). The distance between them is 4.9256 in the units of the worksheet. The mean is -0.2796 and the median is -0.0701. A mean gives every period equal weight and includes the influence of extreme observations. A median locates the middle of the ordering. Neither measures the experience of a specific US account with transactions concentrated on one or two dates.
A second question is how much the wage growth gap generally changed between adjacent observations. Its median absolute change was 0.1880. The transition from 2022 Q3 to 2022 Q4 lies closest to that amount, going from -0.0641 to 0.1240. In that interval the first input moved by -0.1335 and the second by -0.3215 in their respective units. Compare those with the largest-change interval. The same final-sized change can come from modest moves in both inputs or large movements that largely offset.
For the high observation, ask what the same calculation would have returned if only the first input had taken its median sample value. Using 2.9904 in place of 3.5511 while keeping the second input at 2.2773 gives 0.7131. This is a deliberately constructed comparison. Those values need never have occurred together. If an input is contractually fixed or mechanically related to the other one, interpret the substitution as an arithmetic sensitivity exercise rather than a market scenario that could have been traded.
Does the dollar chart agree with the worksheet?
The largest absolute adjacent change in the dollar value of one GBP occurred from 2022 Q3 to 2022 Q4. The market comparison changed from 1.113400 to 1.207700 USD per unit, or 8.47%. By contrast, the worksheet moved by 0.1880 in its own units. A percentage currency return and a change in the wage growth gap are different measurements. Comparing their signs is meaningful only after specifying the direction and recognizing when one input is itself a transformation of the exchange rate.
Of the 39 adjacent pairs, 39 had a measurable change in both series. In 25 they moved in the same signed direction, and in 14 they moved in opposite directions. The remainder had a flat result in at least one column at the stated numerical tolerance. These counts describe a sample, with no assumption of independence between observations. Where the translation formula already uses the exchange rate, part or all of the association can be mechanical. An agreement count alone is unsuitable as a trading win rate.
Compare a period where the signs explicitly disagreed. From 2016 Q1 to 2016 Q2, the dollar value of one GBP moved -7.92% and the worksheet changed by 0.4745. The first input ended at 2.6059 and the second at 2.5391. Record the observation even if it challenges your preferred narrative. Then return to bls eci and establishment earnings documentation to test whether the disagreement reflects definitions, different sampling dates or a genuinely different economic exposure. The outcome by itself does not choose between these explanations.
What was knowable before the last observation?
Keep the last quarter outside the record when setting a reference. The earlier 39 observations had a median worksheet value of -0.0641. The last result was -0.3953 in 2024 Q4. A simple baseline using the immediately preceding value, -0.0762, misses the last result by -0.3191 on an actual-minus-baseline convention. The earlier median misses by -0.3312. These baselines answer different questions about stability and representativeness.
Extend the last-value test across every adjacent pair and take the mean absolute difference. The result is 0.4329, compared with a median absolute difference of 0.1880. The mean gives unusually large misses their full weight. The median describes a typical miss. When you evaluate a real budget, multiply a per-unit figure only by its proper exposure, and account for any amount the formula already includes. Multiplying a dollar total by the entire invoice a second time would produce a fictitious level of risk.
These tests run on one documented set of historical observations. A revised series, an annual value compiled after year-end or a market quote taken after a release can include information unavailable at the hypothetical decision. To turn the worksheet into a real-time study, save the exact version that was available, the timestamp at which it became available and the quote at which a decision could be implemented. Keep matched quarterly wage growth calculations and bls methodology with that file. A comparison that relies on a later release remains a historical reconciliation even if it happens to fit the chart perfectly.
How large is the difference on a common annual payroll base?
Apply the two observed year-over-year percentage growth rates to the same $4.8 million illustrative payroll. Since the base is identical, the difference is the payroll multiplied by the percentage-point gap divided by 100. The output makes the scale intelligible without claiming either national index priced a particular workforce.
The output column below is dollar difference on a hypothetical $4.8 million payroll. This is a second calculation on the same dated records. State the assumption before reading the result so it is clear which parts of the comparison come from observations and which come from the proposed decision. The smallest calculated result occurs in 2020 Q2, at -175,287.5733. The largest occurs in 2021 Q2, at 61,143.3496. A negative result, where the formula allows one, means the order of the comparison matters. It does not mean that the source supplied a negative market price.
| Period | First input | Second input | Original worksheet result | Second calculation |
|---|---|---|---|---|
| 2020 Q2 | 2.9240 | 6.5758 | -3.6518 | -175,287.5733 |
| 2024 Q3 | 3.7469 | 3.8231 | -0.0762 | -3,656.0197 |
| 2021 Q2 | 3.5511 | 2.2773 | 1.2738 | 61,143.3496 |
| 2024 Q4 | 3.7105 | 4.1057 | -0.3953 | -18,972.1227 |
For a central case use 2024 Q3, where the result is -3,656.0197, against a full-sample median of -3,365.7605. The associated FX observation was 1.33990 in the GBP/USD convention on 2024-09-30. Compare it with the largest case rather than simply picking the most recent observation. If an assumed quantity, policy or percentage in the calculation would have been different at the time, describe the result as a controlled comparison across historical conditions. Avoid presenting it as a transaction the source actually recorded.
The first 20 records, 2015 Q1 through 2019 Q4, average -5,177.8662 on this second calculation. The later 20 records, 2020 Q1 through 2024 Q4, average -21,665.8811. The signed difference is -16,488.0149. This gives equal weight to each retained observation and asks how the same rule behaved over two consecutive intervals. It does not adjust for changes in business activity or prove that the start of the later interval marks a regime change. A fixed roster, bonuses, turnover and benefit arrangements can make an employer’s actual experience differ. The exercise is a common-base comparison of growth measures.
What would make the apparent pay acceleration disappear?
First compare private wages with private wages rather than mixing the civilian compensation index with an hourly cash wage statistic. Then check four-quarter growth under a quarter-average and quarter-end convention for hourly earnings. If the conclusion flips under a small timing change, report that sensitivity.
An index construction designed to control composition and a simple national hourly earnings average can be valuable at the same time. The informative exercise is explaining which aspect of wage growth each captures.
How to identify the price setup on a GBP/USD chart
Quarterly private wage growth and a five-minute GBP/USD pattern have different clocks. The chart is a separate demo exercise in an explicitly denominated currency pair. An ECI surprise matters to this test only if you can establish when it became known and what price was executable.
Use a five-minute demo chart with a named time zone, such as America/New_York. The first decision is where an existing swing could attract orders. In the drawing the prior low sits at 1.30148. Mark it while the chart still ends before the next challenge. The subsequent wick reaches 1.30061, below the earlier reference, and the market returns through it. ICT describes that sequence as a liquidity sweep. Candles show traded or quoted prices on a feed, so the sequence does not establish any individual institution’s identity or the number of orders at the swing.
The next test is displacement through the earlier internal swing at 1.30366. In this schematic the outer wicks of bars five and seven leave a three-candle fair value gap between 1.30297 and 1.30350. Write down both boundaries before testing the retest. A wick across the initial level without displacement is a different observation. A displacement without a later return can leave a correctly identified setup unfilled. Preserve each outcome so a replay does not silently select only the attractive-looking retracements.
How to trade the retest on demo
For the hypothetical long position, the order waits at 1.30322 after the gap has formed. The protective stop is 1.30011, beyond the swept extreme. The target is 1.30882, which requires the quoted pair to move higher. Cancel the order if price reaches invalidation before entry, the agreed observation window expires, or the executable spread makes the original risk budget infeasible. A chart mid touching a line does not prove the customer’s bid or offer filled. In a live record those two events need separate timestamps.
The second drawing shows one favorable branch solely to establish the accounting. A losing branch exits at the stop under an exact-fill assumption. A third branch never enters and incurs no modeled round-trip charge. If stop and target both lie within one observed bar, the wick alone does not reveal their order. Seek finer time-stamped evidence or retain an ambiguous result rather than labeling the trade a winner. For an event study, select the exit, expiry and treatment of ambiguous sequences before viewing the release-day chart.
If a payroll earnings release and the ECI send conflicting messages, log the conflict before reading the outcome. A later revision cannot retroactively justify a fill at an earlier price.
Worked trade in a dollar-denominated demo account
| Field | Hypothetical execution |
|---|---|
| Pair and side | GBP/USD long |
| Size | 26,000 GBP |
| Entry | 1.30322 |
| Protective stop | 1.30011 |
| Target | 1.30882 |
| Gross risk and potential reward | $80.86 and $145.60 |
| Assumed round-trip charges | $3.81 |
First subtract the entry and stop in absolute price units. The distance is 0.00311 USD per GBP, compared with 0.00560 to the target. Multiply each by 26,000 base units. That yields 80.8600 USD of gross risk and 145.6000 USD of potential gross gain. The figures are already in the USD account currency. Keep the full numerical precision through this step.
Gross planned risk is $80.86 and potential gain is $145.60. Divide gain by risk: $145.60 / $80.86 = 1.80. On a risk-to-reward convention that is 1:1.80. Now assume $3.81 in total round-trip charges in either completed branch, with executable entry and exit prices in the example. Net risk is $80.86 plus $3.81, or $84.67. Net potential reward is $145.60 minus $3.81, or $141.79. The net R:R is 1:1.67 from $141.79 / $84.67. These ratios use full-precision amounts before display rounding.
If the stop slipped one further pip, the modeled exit would move to 1.30001 and the completed loss including the assumed charge would become $87.27. Compare this with the original $84.67. Slippage, funding and market access can all affect an actual instrument. The purpose of this branch is to make the size and account-currency conversion explicit. A promising reward-to-risk ratio says nothing about the frequency with which this particular entry, protective exit and target are actually executable.
To annotate the rehearsal, mark the existing swing first, then identify displacement and the interval between the outer candle wicks. For definitions and session context, see the school’s lessons on fair value gaps, order blocks, the London session, market structure shifts, and the Judas swing.
Sources and calculation notes
BLS guide to ECI index numbers and percent changes. BLS ECI program.
Historical series and original records. DEXUSUK series, units and frequency · ECIWAG series, units and frequency · CES0500000003 series, units and frequency. The calculations use observations available when checked on November 15, 2026. Subsequent revisions can change retrospective comparisons.
Frequently asked questions
Is the ECI measured in dollars per hour?
It is an index of changes in costs. Separate labor-cost series can report dollar levels.
Is total compensation the same as wages?
Total compensation includes employer benefit costs as well as wages and salaries.
Can average hourly earnings rise without raises?
A shift in the distribution of paid hours can raise the average.
Are the ECI weights fixed forever?
BLS maintains and periodically updates its design and weights. Refer to the methodology for the period under study.
How can I compare the two series fairly?
Align coverage, compensation concept, observation window and growth calculation, then report the remaining differences.
To take the release from the data table to a dated trading record, use ADP vs. Nonfarm Payrolls, Core PCE and EUR/USD, the news-release filter, and hindsight-free replay.
