A US investor sees a Treasury bill quote under a discount-rate heading and multiplies that annual rate by $10,000. The result is too large for a roughly three-month holding and applies the wrong interpretation to the money invested. The bill pays a face amount at maturity. The price paid today does the work.
A bill discount rate measures the discount against face value on a 360-day basis. A simple investment yield for a short bill measures the gain against the amount paid and annualizes on the applicable year basis. The two quotations can describe the same promised cash flows.
Price the short bill before quoting a return
For a hypothetical 91-day bill, a 4.38% discount rate gives a purchase price of face times one minus 0.0438 times 91 divided by 360. Subtract price from $10,000 to get the dollar discount. For a fixed 365-day teaching convention, divide the gain by the price and multiply by 365 divided by 91. Use the actual Treasury terms and dates to reproduce an official auction investment rate.
Distinguish an annualized yield from a maturity payment
The calculated annualized figure assumes an annual scale for comparison. The investor receives only the cash difference associated with the actual holding period if held until maturity, before taxes and costs. Selling early means accepting a market price. A secondary-market three-month discount series is a reference. It need not equal the auction result of a specific bill with its own settlement date and remaining days.
Reconcile the auction notice with the cash ledger
An auction result can quote a high rate, an investment rate and a price per hundred of face. A brokerage statement can instead show the actual dollars debited for the entire lot. Convert price per hundred to a percentage of face before comparing. For example, 98.92 per hundred means $9,892 on $10,000 face, before any distinct fees. A value below one hundred is consistent with buying a positive-return conventional bill at a discount.
Count the days from settlement to maturity under the applicable official convention. A Thursday auction date is not automatically the cash settlement date. Using a few extra days in the formula can create a visible difference even when both parties used the same discount quote. Check the actual security identifier and dates before accusing a broker of using the wrong yield.
For a sale before maturity, replace the promised face receipt with the actual sale proceeds and change the holding period to the days actually held. Rising market rates can reduce a bill’s resale price. A calculation that held the original bill to its maturity cannot establish the outcome of an early sale. Annualizing a very short actual return can also make small price differences look large.
Finally separate cash invested from face owned. A $10,000 face bill generally costs less than $10,000 when bought at a positive discount. The remainder of an initial $10,000 cash budget can earn a different rate or sit idle. To compare with another investment using the full budget, include the disposition of this residual instead of assuming every dollar earned the bill’s yield.
What ten years of US releases show
Use the last available three-month secondary-market bill discount rate in each month. Multiply $10,000 face by the rate divided by one hundred and by 91/360. The series does not identify an auction or a specific 91-day security.
Use the rows below as a check on the method. The first complete observation is 2016-01 and the last is 2025-12. There are 120 usable monthly observations in the 2016 through 2025 study window. A row needs both inputs and the second calculation described below. A missing source observation is left out if the calculation depends on it. An empty cell has a different meaning from a genuine zero. The table shows selected rows and retains full precision for the calculations behind the displayed values.
Start with 2018-03, the observation closest to the sample median for discount from $10,000 face in usd. Enter 1.700 for three-month bill discount rate in percent and 91.000 for assumed remaining days. Applying the rule gives 42.972. Write the unit beside the result before rounding. It determines whether this number belongs in a dollar ledger, a rate comparison or a column measuring a change. Writing an extra percent sign or moving the decimal two places can produce a neat calculation that answers an entirely different question.
| Period | Three-month bill discount rate in percent | Assumed remaining days | Discount from $10,000 face in USD |
|---|---|---|---|
| 2016-01 | 0.320 | 91.000 | 8.089 |
| 2018-03 | 1.700 | 91.000 | 42.972 |
| 2021-04 | 0.010 | 91.000 | 0.253 |
| 2023-10 | 5.330 | 91.000 | 134.731 |
| 2025-12 | 3.570 | 91.000 | 90.242 |
For a sense of ordinary variation, the middle half of the observations lies between 8.342 and 106.230 on the discount from $10,000 face in usd measure. The endpoints of the full sample are 0.253 in 2021-04 and 134.731 in 2023-10. These are different comparisons. A reader budgeting for a single decision might want to test an adverse endpoint. A reader describing a typical period has more reason to look at the middle half. Neither range gives a promised boundary for what a later observation can be.
What changes if the bill matures a week earlier?
Raise the annual discount quotation by twenty basis points and shorten the illustrative remaining term by seven days. The annualized figure rises but the number of days earning a discount falls. Calculate both effects on dollars per $10,000 face.
| Illustration | Three-month bill discount rate in percent | Assumed remaining days | Discount from $10,000 face in USD |
|---|---|---|---|
| Baseline | 1.700 | 91.000 | 42.972 |
| First change | 1.900 | 91.000 | 48.028 |
| Second change | 1.700 | 84.000 | 39.667 |
| Both changes | 1.900 | 84.000 | 44.333 |
Read the first two rows across. The first alteration is 0.200 in the units described as points added to the discount rate. With the other input fixed at 91.000, the result moves from 42.972 to 48.028, a signed change of 5.056. Now return to the original inputs before applying the second alteration of -7.000 in the units described as change in remaining calendar days. That separate result is 39.667. Starting the second trial from the already altered first row would accidentally test both changes at once.
With both changes in place the answer becomes 44.333, or 1.361 relative to the baseline. Adding the two isolated changes gives 1.750. The difference between the joint and additive calculations is -0.389 at the displayed precision. There is an interaction between the two inputs. Once the first changes, the same movement in the second acts on a different base. Recomputing the final result captures the interaction automatically.
Holding face fixed differs from holding invested cash fixed. If the investor instead has exactly $10,000 to spend, allowable denominations, execution price and residual cash affect the position that can actually be purchased.
The exercise uses a fixed 365-day annualization for its complementary investment yield. Use actual Treasury conventions when matching a particular auction.
Reconstruct the largest move between adjacent releases
Between 2020-02 and 2020-03, discount from $10,000 face in usd went from 31.597 to 2.781. Its signed change of -28.817 had the greatest absolute size among the 119 complete adjacent month pairs. To find it, subtract each earlier value from its neighbor, take absolute values solely to rank the pairs and restore the sign when reporting the winner. Rank changes rather than levels. The highest level and the fastest move need not occur at the same time.
The first input went from 1.250 to 0.110. The second went from 91.000 to 91.000. Replace just the first earlier input with its later value. This gives 2.781, which accounts for -28.817 of the observed change on that replacement order. Replacing the second input then accounts for 0.000. The two amounts reconcile to -28.817. This arithmetic answers which measured input changed the answer. Evidence outside the worksheet is needed to explain why the input itself moved.
Try replacing the second input first. Its intermediate result is 31.597, followed by the same final 2.781. The two orders are useful when discussing three-month bill discount rate in percent alongside assumed remaining days. If the assigned contributions depend on order, show both or give the order explicitly. An unqualified statement that one factor accounted for the entire change might depend on an unnoticed choice about which input the calculation held constant.
Check a less dramatic interval
For comparison, the median absolute adjacent change was 1.264. The pair nearest that magnitude ran from 2017-05 to 2017-06, moving from 24.267 to 25.531. For that pair the first input changed by 0.050 and the second by 0.000. Put these inputs alongside the largest-move pair. A single dramatic date is a poor place to learn the scale of an ordinary observation, especially if the date was chosen after reviewing the entire history.
Simple 365-day investment yield in percent
Divide the discount by the modeled purchase price. Multiply by 365/91 and by one hundred. The 365-day assumption is explicit throughout to isolate the quote convention.
Keep the second result on a separate line in the working file. In 2018-03, the first measure, discount from $10,000 face in usd, was 42.972. The second, simple 365-day investment yield in percent, was 1.731. This date was selected because the second result lies closest to its own sample median, rather than because it gives the most favorable comparison. Start from the inputs in the table if you reproduce it. A second measure can have a different scale, denominator and sign interpretation from the first.
| Period | Three-month bill discount rate in percent | Assumed remaining days | Simple 365-day investment yield in percent |
|---|---|---|---|
| 2018-03 | 1.700 | 91.000 | 1.731 |
| 2021-04 | 0.010 | 91.000 | 0.010 |
| 2023-10 | 5.330 | 91.000 | 5.478 |
| 2025-12 | 3.570 | 91.000 | 3.653 |
At the lower end of this calculation, 2021-04 gives 0.010 with inputs of 0.010 and 91.000. At the upper end, 2023-10 gives 5.478 with inputs of 5.330 and 91.000. Check the formula before interpreting the order. A dollar outlay, a net receipt, a growth rate and a distance from a benchmark answer different economic questions even when their values can all be ranked from low to high. Match the actual term and applicable annualization convention for an official auction. Fees, taxes and an early sale change the realized result.
Reading the final observation without hindsight
Cover the last row and write two estimates for discount from $10,000 face in usd. One uses the latest earlier observation, 94.286 from 2025-11. The other uses the median of the preceding 119 records, 42.972. Reveal 2025-12. The observed result is 90.242, so actual minus estimate is -4.044 for the recent observation and 47.269 for the historical middle. Keep both errors with the original estimates. Quietly replacing a poor baseline with a better one after the reveal removes the point of the exercise.
Next inspect the final record itself. It contains 3.570 for three-month bill discount rate in percent and 91.000 for assumed remaining days, producing 3.653 on the second decision measure. Someone reproducing this result from rounded figures might differ in the last decimal. A large difference demands a different explanation. Check the observation period, quote direction or growth interval and whether the same quantity appears twice. Face value, settlement, maturity and quoted basis provide a starting point for an audit. Write down any imposed assumption that cannot be found in those records.
Did the indicator separate stronger and weaker US dollar periods?
To connect the lesson with the US currency market, compare the worksheet with a different series. Use the Federal Reserve nominal broad dollar index, measured at the last available observation in each period. A rise means the dollar strengthened against its weighted basket. Measure the percentage change from one period-end to the next. That change is a basket return. A specific bilateral currency, a card settlement or a leveraged USD/JPY position can give a different sign and amount.
Take the first 59 matched transitions as a calibration segment. Their starting-period median for discount from $10,000 face in usd was 26.542. Freeze that cutoff. In the remaining 60 transitions, group each starting observation by whether it was at least that value. Measure the subsequent broad dollar return within each group. Keeping adjacent pairs only prevents a missing month or quarter from silently becoming a longer observation with a different holding period. Missing values never count as zero returns.
| Later-period group | Records | Mean USD move % | Median USD move % | USD rose |
|---|---|---|---|---|
| At or above 26.542 | 43 | 0.047 | -0.135 | 19 |
| Below 26.542 | 17 | 0.355 | 0.245 | 10 |
The higher group contains 43 later observations with a mean next-period dollar move of 0.047%. The lower group contains 17 with a mean of 0.355%. Their difference is -0.308 percentage points on a high-minus-low convention. A gap is descriptive evidence for this sample and definition. Before attributing it to this measure, check whether the groups cluster in different years and whether the median tells the same story as the mean.
Release timing limits what the calculation can establish. An observation labeled with a month or quarter need not have been public at its last market close. Historical series can also change after revision. For a prospective test, replace each worksheet label with the timestamp when both inputs could actually have been known, then start the currency return after that time. Preserve a release vintage and executable prices. The table here is a retrospective comparison and supplies no entry price, success probability or trading performance record.
How much does a week change the bill discount?
Compare two hypothetical new bills at the same bank-discount rate and $10,000 face, one with 84 days to maturity and the other with 91. Both are held to maturity. This isolates seven days of discount accrual on the same face amount. An actual early sale of a 91-day bill would need its market price.
The investor treats a difference of more than $5 per $10,000 face as material when comparing dates.
| Observation | USD discount for an 84-day bill at the same quote | USD discount for a 91-day bill at the same quote | Second minus first |
|---|---|---|---|
| 2016-01 | 7.467 | 8.089 | 0.622 |
| 2018-12 | 56.000 | 60.667 | 4.667 |
| 2023-10 | 124.367 | 134.731 | 10.364 |
| 2025-12 | 83.300 | 90.242 | 6.942 |
Use the last complete case, 2025-12, as a reconciliation. The first calculation gives 83.300 and the second gives 90.242. Subtract the first from the second to obtain 6.942 USD. A positive result has this particular interpretation: the longer hypothetical bill has a larger maturity gain. The absolute distance is 6.942 against the assumed allowance of 5.000. Restoring the sign after checking the size of the difference matters when one party pays an amount that another party receives.
For 2018-12, the absolute difference was 4.667 USD. This is the observation nearest the stated allowance, with a distance from that boundary of 0.333. The underlying values were 56.000 and 60.667. Check a borderline case at full precision before assigning it to either side. If you change the allowance, carry the new rule through all dates. Applying it to just the most interesting row would quietly change the selection method.
How often did the difference matter under these assumptions?
The absolute difference exceeded 5.000 USD in 41 of 120 complete records. It stayed at or below that level in 79. The largest observed absolute difference was 10.364 in 2023-10, against a middle observation by magnitude of 3.442. This count gives each observation equal weight. A person whose largest obligations or research decisions cluster in a small number of months can experience a very different total effect from the fraction of dates shown here.
Shortening the term of a hypothetical new bill is a controlled comparison. It cannot substitute for valuing a bill sold on an actual secondary market.
Build the calculation in two spreadsheet cells
Put three-month bill discount rate in percent in column A and assumed remaining days in column B. Use row one for labels and enter the two inputs from 2018-03 in row two. The numeric entries are 1.70000 and 91.00000 when displayed to five decimals. In this worksheet, a percentage quoted as 4.25 is entered as the number 4.25, not as the spreadsheet value 0.0425. For dollar or currency amounts, enter numbers and use cell formatting for currency symbols so the program can still do arithmetic.
In C2 enter =10000*(A2/100)*B2/360. The expected result for discount from $10,000 face in usd is 42.97222 with unrounded inputs. Repeat the formula on the next dated row before copying it through a longer file. A second manual check on a different observation is more informative than assuming that a formula which worked on a single coincidence will work everywhere.
Applying a 365-day denominator to the bank-discount quote
The dollar discount is based on the specified discount quotation and its 360-day convention. A 365-day convention can enter a separate investment-yield calculation. Introducing it at the initial pricing stage changes the dollars invested before the return is even measured.
To diagnose that problem, enter 10000*(A2/100)*B2/365 in a separate comparison cell. With these inputs it displays 42.38356. Keep the column labeled as a diagnostic. A superficially similar number can have a different unit, denominator or sign. Where two formulas give the same number on a particular row, that agreement is a reason to test a second case with deliberately different values. It does not establish that the formulas are interchangeable.
Set face to $10,000, term to ninety days and the discount rate to four percent. The discount on the 360-day convention should be $100. Confirm the purchase price plus the discount equals face before considering annualized yield or comparing a different security.
How to identify the price setup on a USD/JPY chart
The USD/JPY exercise follows price rather than using a bill yield as a trade trigger. A dollar investor holding a short bill has an instrument with a maturity cash flow. A leveraged FX position has a different payoff even on the same day.
Use a five-minute demo chart with a named time zone, such as America/New_York. The first decision is where an existing swing could attract orders. In the drawing the prior low sits at 153.342. Mark it while the chart still ends before the next challenge. The subsequent wick reaches 153.255, below the earlier reference, and the market returns through it. ICT describes that sequence as a liquidity sweep. Candles show traded or quoted prices on a feed, so the sequence does not establish any individual institution’s identity or the number of orders at the swing.
The next test is displacement through the earlier internal swing at 153.561. In this schematic the outer wicks of bars five and seven leave a three-candle fair value gap between 153.492 and 153.545. Write down both boundaries before testing the retest. A wick across the initial level without displacement is a different observation. A displacement without a later return can leave a correctly identified setup unfilled. Preserve each outcome so a replay does not silently select only the attractive-looking retracements.
How to trade the retest on demo
For the hypothetical long position, the order waits at 153.517 after the gap has formed. The protective stop is 153.205, beyond the swept extreme. The target is 154.219, which requires the quoted pair to move higher. Cancel the order if price reaches invalidation before entry, the agreed observation window expires, or the executable spread makes the original risk budget infeasible. A chart mid touching a line does not prove the customer’s bid or offer filled. In a live record those two events need separate timestamps.
The second drawing shows one favorable branch solely to establish the accounting. A losing branch exits at the stop under an exact-fill assumption. A third branch never enters and incurs no modeled round-trip charge. If stop and target both lie within one observed bar, the wick alone does not reveal their order. Seek finer time-stamped evidence or retain an ambiguous result rather than labeling the trade a winner. For an event study, select the exit, expiry and treatment of ambiguous sequences before viewing the release-day chart.
Check the original publication time in Eastern time against the chart clock. A price move before the release cannot be attributed to the reported value merely because both appear under the same calendar date. A trade record needs the pre-release spread, the available quote after the news and the point at which the order became eligible.
Worked trade in a dollar-denominated demo account
| Field | Hypothetical execution |
|---|---|
| Pair and side | USD/JPY long |
| Size | 24,000 USD |
| Entry | 153.517 |
| Protective stop | 153.205 |
| Target | 154.219 |
| Gross risk and potential reward | $48.88 and $109.25 |
| Assumed round-trip charges | $3.57 |
First subtract the entry and stop in absolute price units. The distance is 0.312 JPY per USD, compared with 0.702 to the target. Multiply each by 24,000 base units. That yields 7,488.0000 JPY of gross risk and 16,848.0000 JPY of potential gross gain. For a USD account, divide each quote-currency amount by its respective assumed exit in JPY per dollar. Use the stop exchange rate for the loss and the target rate for the gain. Keep the full numerical precision through this step.
Gross planned risk is $48.88 and potential gain is $109.25. Divide gain by risk: $109.25 / $48.88 = 2.24. On a risk-to-reward convention that is 1:2.24. Now assume $3.57 in total round-trip charges in either completed branch, with executable entry and exit prices in the example. Net risk is $48.88 plus $3.57, or $52.45. Net potential reward is $109.25 minus $3.57, or $105.68. The net R:R is 1:2.01 from $105.68 / $52.45. These ratios use full-precision amounts before display rounding.
If the stop slipped one further chart increment of 0.010, the modeled exit would move to 153.195 and the completed loss including the assumed charge would become $54.02. Compare this with the original $52.45. Slippage, funding and market access can all affect an actual instrument. The purpose of this branch is to make the size and account-currency conversion explicit. A promising reward-to-risk ratio says nothing about the frequency with which this particular entry, protective exit and target are actually executable.
For the chart terminology and session conventions used in a replay, see fair value gaps, order blocks, the London session, market structure shifts, the Judas swing.
Sources and data conventions
TreasuryDirect Treasury bills. Historical series used in the calculations: DTB3 observations and units, DTWEXBGS observations and units.
Frequently asked questions
What does a Treasury bill pay at maturity?
For a conventional bill redeemed at par, the holder receives its face amount. On the illustrative $10,000 face purchase, the gross dollar gain equals $10,000 minus the purchase price when held through maturity.
Why are discount rate and investment yield different?
One uses face as the discount base and a 360-day convention. The other measures earnings on the amount invested and uses the applicable annualization basis. They can represent the same purchase and maturity proceeds.
Is a 13-week bill always exactly 91 days for my calculation?
Use the actual settlement and maturity dates of the security. The exercise fixes 91 days to compare observations consistently. Official calculations depend on actual terms and applicable conventions.
Can I compare a bill discount rate directly with a deposit APY?
Convert both into cash flows over the same holding period. Account for principal, fees, compounding and reinvestment assumptions. An annual percentage yield and a bank-discount quotation are different measures.
Why is my broker’s bill price different from this series?
The series summarizes a three-month secondary-market benchmark. A broker quote identifies a security, side, date and applicable costs. Different remaining days or market times can produce different prices.
For related US dollar examples, read the US yield curve, SOFR and dollar funding, US real yields, and FedWatch probabilities.
